12 1/2" Spindle Bore, Poreba TPL-90M, 36" X 120" Engine Lathe, w/Taper Attach.

Description

Now available for your inspection under power and purchase at the Warehouse our J-V Partner in Cincinnati, Ohio is this
"Excellent Operating"
Poreba Model TPL-90M, 36" swing X 120" cc Geared Head Engine Lathe,
w/ 12 1/2" Spindle Bore.
Also has Taper Attachment, (2) 24" 4 Jaw Chucks mounted on the front and rear if the spindle, and Inch and Metric Threading.
We have run this machine through all speeds and feeds and find it to be in
Excellent Operating Condition.
Further, it is equipped with the very desirable Power Rapid Traverse in Both Axes, Inch and Metric Threading, and Taper Attachment.
These Poreba Engine Lathes are Excellent, Heavy Duty Engine Lathes Built With a Lot of Quality in Poland.
Specifications are as follows:
36" x 120" POREBA TPL-90M, 12 1/2" Hole, Taper Attachment, Inch & Metric Threading, and (2) 24" 4 Jaw Chucks Mounted Front and Back of the Spindle
POREBA HEAVY DUTY OIL COUNTRY LATHE
MODEL: TPL-90M
SERIAL NUMBER: 1197-018, Manufactured New in 1979
GENERAL SPECIFICATIONS
Swing Over Bed: 36-1/2"
Swing Over Carriage: 25-1/2"
Distance Between Centers: 120"
Spindle Bore: 12 1/2"
Spindle Nose: A1-20"
Spindle Speeds: (18)  5 - 250 RPM
Longitudinal Feeds, U.S:  .0043 - .248 IPR
Longitudinal Feeds, Metric: .11 - 6.4 mm/rev.
Cross Feeds, U.S.: .0021" -  .124 IPR
Cross Feeds,, Metric: .05 - 3.20 mm/rev.
Cross Slide Travel: 18-1/2"
Top Slide Travel: 11-3/4"
Threads, Inch: (54) 1/2 - 16 TPI
Threads, Metric: (72) 1 - 60 mm
Threads, D.P.: 1 - 60
Threads, Modular: .25 - 15 mm
Leadscrew, Diameter and Pitch: 2" x 2 TPI
Tailstock Spindle Diameter: 5"
Tailstock Spindle Travel ( Two Speed): 11-3/4"
Tailstock Spindle Taper: No. 6 M.T.
Width Of Bed: 23"
EQUIPPED WITH
30 HP Main Motor
3/4 HP Rapid Traverse Motor
24" Front and Rear 4-Jaw Chucks
Taper Attachment
Four Way Rapid Traverse
Hardened and Ground Bedways
Hardened and Ground Headstock Gears
Approximate Weight: 18,000 Lbs.
PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION
You can see this very nice machine tool under power at our J-V Partners Warehouse in Cincinnati, Ohio by calling Andy or myself for inspection (see phone numbers below).  This is a
Poreba Model TPL-90M Geared Head (Hollow Spindle) (Oil Country) Engine Lathe built with a whole lot of quality in Poland.
Overall, a
"Great Operating, Good Looking"
Engine Lathe with great ways that is ready to go to work. The appearance speaks for itself (see photo's). If you need a real good Heavy Duty Engine Lathe of this size with a 12 1/2" Hollow Spindle, don't pass up this opportunity. Y
ou will have no regrets if you buy this machine.
We believe the new owner of this Poreba Model TPL-90M Geared Head Hollow Spindle Engine Lathe will be very happy with it.
We invite you to check our eBay feedback and you’ll understand that we properly describe our items.
The condition we state an item is in, is the way it will be when we ship it.
We will load, free of charge on any truck or trailer.
You always buy with confidence at Machine Tools of America.
First of all, our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit.
Secondly, we offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated.
If you’re not satisfied that this item is as we represented it to be, send it back to us and we’ll refund what you paid us.
Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse (515 Kercher St., Miamisburg, OH 45342).
We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days, whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping.
We accept Company Checks, Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, Credit Card, PayPal, or even Cash.
We are:
Machine Tools of America and you can contact us by phone:
Bruce at 937-545-8475 or Andy at 937-604-6031.
Our fax is 937-866-6668 or 937-866-8514 and the office phone is 937-866-8334, but we’re seldom there.
For ground shipping on flat bed, single drop deck, or double drop deck trailers, we recommend you contact the following: White Brokerage, Inc.; toll free phone number 877-922-4212
(ask for Reenie),
A&P Freight Services; toll free number
800-628-6419 Ext 225 (ask for Paul),
Best Ways Brokerage Inc.; toll free number 800-426-1220 (ask for Lisa), Fastway Transport, Inc.; toll free number 800-817-2381 (ask for Chris).
All four (4) of these companies are located in northwestern USA and are very adept at organizing partial capacity shipments at favorable prices to anywhere in North America.
Inform them that they will pick up your machine at Machine Tools of America’s warehouse at 515 Kercher St., Miamisburg, OH 45342. The Polamco Engine Lathe will weigh approx. 18,000# and occupy 19’ of bed space.
Further, inform them it needs to be tarped.