1995 Mori Seiki SL25Y/500

Description

1995 Mori Seiki SL-25Y/500
CONTROL: (MSC-516) MF-T6 [FANUC 16]
SPECIFICATIONS
Distance Between Centers: 24.41"
Max Swing over Bed: 32.09"
Max Turning Length: 20.87"
Max Turning Diameter: 10.24"
X-Axis travel: 7.68” (5.12”+2.56”)
Y-Axis travel: 3.94" (± 1.97")
Z-Axis travel: 23.23”
Chuck Size: 10" Hydraulic
Spindle Motor: 20 HP
Spindle Speed range: 35-3,500 RPM
Spindle Nose: JIS A2-8
Through Spindle Bore: 3.15"
C-Axis, Min. spindle indexing angle:  0.001°
Tool Positions: 12
Live Tool Positions: 12
Square tool: 1"
Boring Bar: 1.5"-2"
Live tool speed range: 100-2000 RPM
Live tool motor: 5 HP
X: 472.44 ipm
Rapid traverse rate   Y: 236.22 ipm
Z: 590.55 ipm
Tailstock: MT5, 15.87” travel, 4.33” diameter, 1432.2 lbf thrust force, 22638 lbf clamping force.
Mass: 11,880lb. + extras
Floor space: 125.31"x70.83"
Max height: 81.1"
RS 232 Port Interface
AND
to
USB adapter
!
Tool Eye, Air Filter System, 480 volt-240 volt Dry Transformer, Turbo Chip Conveyor.
Levelling tool plate. Alignment tool. 2-F77052 Turret plugs.
Box of extras(parts, O-rings, motors, tools) that came with it.
All books that I have.
Available
static tool posts.
6-T00129
1-T00115
3-T10065
2-T10069
6-B27007
Available
LIVE tool posts.
3-T32089 ,500.each
2-T32090 5. each
All Tool Posts come with at K, Full turret at K (two live tool posts, one each type, 1-T32089, 1-T32090) no extras, no tool posts at all for K OBO.
I spent just under a grand for ONE
T10065 from MORI!!!
BUYER IS RESPONSIBLE FOR RIGGING AND TRANSPORT.