US INDUSTRIAL 20" x 120" Precision Geared Head Engine Lathe USL20120BH-KIT

Description

YOU ARE VIEWING A NICE
20" X 120" US INDUSTRIAL PRECISION GEARED HEAD ENGINE LATHE: MODEL USL20120 BH-KIT
Buyer is
responsible
for offloading -  FREE CNC TRAINING AVAILABLE at our DEMO CENTER IN TENNESSEE
FOR ONSITE TRAINING CONTACT US FOR PRICE QUOTE
FOR
TECHNICAL
QUESTIONS PLEASE EMAIL THROUGH EBAY
SHIPPING IS TO LOWER 48 STATES ONLY. PUERTO RICO AND HAWAII PLEASE EMAIL FOR FREIGHT QUOTES.
WHILE THESE ARE NORMALLY IN STOCK, PLEASE VERIFY AVAILABILITY BEFORE PLACING ORDER
SPECIFICATIONS:
Swing Over Bed
19.7” (500mm)
Swing Over Cross Slide
11.8” (300mm)
Swing Over Gap
28” (710mm)
Gap Length
9.44” (240mm)
Maximum Workpiece Length
with 3-jaw chuck
118” (3000mm)
Maximum Turning Length
116” (2950mm)
Spindle Bore
4.134” (105mm)
Spindle Type
D1-8 Camlock
12 Spindle Speeds
36 to 1600 RPM
65 Longitudinal Feeds
.0023 to .0937 IPR
65 Cross Feeds
.0011 to .0404 IPR
22 Metric Threads
1 to 14mm
27 Inch Threads
2 to 28 TPI
18 Module Threads
0.5 to 7mm
24 Diametral Pitch Threads
4 to 56 DP
Compound Rest Travel
5.75"
Cross-Slide Travel
12.125"
Tailstock Taper
No. 5 Morse Taper
Tailstock Spindle Travel
5.906” (150mm)
Tailstock Spindle Diameter
2.953” (75mm)
Main Motor HP
10 HP (7.5 kw) 220V or 440V, 3-phase
Rapid Feed Motor
0.4 HP
Coolant Pump Motor
.16 HP, 11 gallons per minute
Lathe Gross Weight
7,700 lbs.
Dimensions
183” long, 40” wide, 50” tall
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR
– Parts
FEATURES:
This precision, heavy duty geared head engine lathe incorporates hardened and precision ground bedways on longitudinal and cross ways, and wide, precision ground gears. It has a gap-bed design, feed-rod/lead screw safety interlock system, weight bearing tailstock and forward/reverse levers at both the aprons and the head stock.
As with all U.S. Industrial lathes, it comes with a plethora of standard accessories, 3 and 4-jaw chucks, follower and steady rests, 4-way rapid travel, work lamp, a coolant system and an operator/service manual.
STANDARD EQUIPMENT:
12” 3-jaw chuck. Universal, self-centering with an American standard tongue and groove top Jaws.
16” 4-jaw independent chuck
Steady rest
4-way toolpost
Thread Dial
Work lamp
Flood coolant system
Sino 2-axis digital readout inch/metric (installed)
Inch reading dials on Apron, Cross-Slide and compound
Manual with test certificate
25” Face Plate & Dog Plate
Foot brake with microswitch and brake
Follow rest
4-way rapid travel
Safety chuck shield
Taper attachment (installed)
Large spindle bore to pass 4”
Full length backsplash
Slide out chip pans
VISIT OUR OTHER ITEMS FOR SALE OR IF YOU DO NOT SEE WHAT YOU ARE LOOKING FOR EMAIL US
BUY WITH CONFIDENCE - WE HAVE 100% POSITIVE FEED BACK ON OUR EBAY SALES.
THANKS FOR LOOKING!
WE LOOK FORWARD TO BEING OF SERVICE.
SIERRA VICTOR INDUSTRIES
*
Note
: PAYPAL ACCEPTED and Florida Purchasers Subject to Applicable Sales Tax. Based on applicable tax laws, eBay will calculate, collect, and remit sales tax in the following states on behalf of sellers for items shipped to customers in the following states: AL, AR, CA, CT, DC, IA, ID, IN, KY, MN, ND, NE, NJ, NM, NY, OK, PA, RI, SC, SD, TX, UT, VT, VA, WA, WV, WY